Meteorological elements of the dataset include the near-surface land-air exchange parameters, such as downward/upward longwave/shortwave radiation flux, momentum flux, sensible heat flux, latent heat flux, etc. In addition, the vertical distributions of 3-dimensional wind, temperature, humidity, and pressure from the surface to the tropopause are also included. Independent evaluations were conducted for the dataset by comparison between the observational data and the most recent ERA5 reanalysis data. The results demonstrate the accuracy and superiority of this dataset against reanalysis data, which provides great potential for future climate change research.
LI Fei, Ma Shupo, ZHU Jinhuan, ZOU Han , LI Peng , ZHOU Libo
Numerical experiments: The climate model used is the fast air sea coupling model (FAMOUS) jointly developed by the British Meteorological Office and British universities The horizontal resolution of the atmospheric model in the FAMOUS model is 5 ° × 7.5 °, 11 layers in vertical direction; The horizontal resolution of the ocean model is 2.5 ° × 3.75 °, 20 layers in vertical direction The atmosphere and ocean are coupled once a day without flux adjustment The tests included the Middle Paleocene (MP,~60Ma BP, test name flat_60ma_1xCO2_sea_3d_ * * 100yr_mean. nc) and the Late Oligocene (LO,~25Ma BP, test name orog_25ma_1xCO2_sea_3d_ * * 100yr_mean. nc) The sea land distribution data is mainly taken from the global coastline basic data set (abbreviated as Gplates, website: http://www.gplates.org/ ）Considering that the initial uplift of Cenozoic terrains such as the Qinghai Tibet Plateau started at about 50~55 Ma (Searle et al., 1987), the global terrain height was set to 0 in the MP test to omit the role of plateau terrain. At 25 Ma, Greenland (Zachos et al., 2001) and the Qinghai Tibet Plateau (for example, Wang et al., 2014; Ding et al., 2014; Rowley and Currie, 2006; DeCells et al., 2007; Polisar et al., 2009) were revised The change of ancient latitude is also considered when reconstructing the ancient topography of the Qinghai Tibet Plateau (Besse et al., 1984; Chatterjee et al., 2013; Wei et al., 2013) At the same time, referring to the change of Cenozoic atmospheric CO2 (Beerling and Royer, 2011), the atmospheric CO2 concentration in the two periods of experiments was 280 ppmv (1 ppmv=1 mg L – 1) before the industrial revolution For simplicity, all land vegetation and soil properties are set to globally uniform values, that is, various land surface properties on each land grid point except Antarctica are assigned to the global average value of non glacial land surface before the industrial revolution, which is also convenient for highlighting the impact of land sea distribution and topographic changes In addition, since we mainly discuss the average climate state and its change in the characteristic geological period on the scale of millions of years, we can omit the influence of orbital forcing, that is, the Earth's orbital parameters are set to their modern values in all experiments Output time: All tests were integrated for 1000 years, using the average results of the last 100 years of each test. This data is helpful to explore the formation and evolution mechanism of the Cenozoic monsoon and drought.
LIU Xiaodong
This data set is the daily vorticity related flux observation data of Naqu flux station (31.64 ° N 92.01 ° E, 4598 m a.s.l.), including ecosystem net ecosystem productivity (NEP), total primary productivity (GPP) and ecosystem respiration (ER) data. The main steps of data pre-processing include wild point removal (± 3 σ）、 Coordinate axis rotation (3D wind rotation), Webb Pearman Leuning correction, outlier elimination, carbon flux interpolation and decomposition, etc. Missing data are interpolated through the nonlinear empirical formula between CO2 flux value (Fc) and environmental factors.
ZHANG Yangjian
This dataset is the daily vorticity related flux observation data of Naqu flux station (31.64 ° N 92.01 ° E, 4598 m a.s.l.), including net ecosystem productivity (NEP), total primary productivity (GPP), ecosystem respiration (ER), evapotranspiration, latent heat, sensible heat, air temperature, relative humidity, wind speed, soil temperature, soil moisture and other data. The main steps of data pre-processing include wild point removal (± 3 σ）、 Coordinate axis rotation (3D wind rotation), Webb Pearman Leuning correction, outlier elimination, carbon flux interpolation and decomposition, etc. Missing data are interpolated through the nonlinear empirical formula between CO2 flux value (Fc) and environmental factors.
ZHANG Yangjian
This data set is the conventional meteorological observation data of the Ngoring Lake Grassland Observation site (GS) in the source region of the Yellow River from 2017 to 2020, obtained by using Kipp&Zonen CNR4, Vaisala HMP155A, PTB110 and other instruments, with a time resolution of half an hour. Mainly include wind speed, wind direction, temperature, relative humidity（specific humidity in 2020）, air pressure, downward short-wave radiation, downward long-wave radiation, precipitation.
MENG Xianhong, LI Zhaoguo
This data set is the conventional meteorological observation data of Maqu grassland observation site in the source region of the Yellow River from 2017 to 2020, obtained by using Kipp&Zonen CNR4, Vaisala HMP155A, PTB110 and other instruments, with a time resolution of half an hour. Mainly include wind speed, wind direction, temperature, relative humidity, air pressure, downward short-wave radiation, downward long-wave radiation, precipitation.
MENG Xianhong, LI Zhaoguo
This data set is the data set of water balance (precipitation, evapotranspiration, runoff, liquid soil moisture) and energy balance (short wave radiation, sensible heat, latent heat and surface soil temperature) for the source of the Yellow River and the Qilian Mountains over the past 40 years. The initial data source is ERA5 Land monthly average data, which is accumulated/averaged to the annual scale through time aggregation. The time range of the data is 1981-2020, the spatial range is 88.5 ° E – 104.5 ° E, 32 ° N – 43 ° N, and the spatial resolution is 0.1 °. The data set can be further used to study the ecological hydrological processes in the source area of the Yellow River and the Qilian Mountains, and provide scientific basis for the optimal allocation of the "mountains, rivers, forests, fields, lakes and grasses" system.
ZHENG Donghai
Normalized Difference Vegetation Index (NDVI) has been widely used for monitoring vegetation. This dataset employed all available Landsat 5/7/8 data on the Qinghai-Tibetan Plateau (QTP) (> 100,000 scenes), and reconstructed high spatiotemporal NDVI time-series data (30-m and 8-d) during 2000-2020 on the TP (QTP-NDVI30) by using the MODIS-Landsat fusion algorithm (gap filling and Savitzky–Golay filtering；GF-SG). For the details of GF-SG, please refer to Chen et al. (2021). This dataset has been evaluated carefully. The quantitative assessments show that the reconstructed NDVI images have an average MAE value of 0.02, correlation coefficient of 0.96, and SSIM value of 0.94. We compared the reconstructed images in some typical areas with the PlanetScope 3-m images and found that the spatial details were well preserved by QTP-NDVI30. The geographic coordinate system of this dataset is GCS_WGS_84. The spatial range covers the vegetation area of the QTP, which is defined as the areas with average NDVI during July- September larger than 0.15.
CAO Ruyin , XU Zichao , CHEN Yang , SHEN Miaogen , CHEN Jin
This data provides the distribution of debris flows in the China-Pakistan Economic Corridor and the Tianshan Mountains by 2021. Based on historical data collection, field surveys and interpretation of remote sensing images, combined with digital topographic maps (DEM) and geological maps, the latest China-Pakistan economic The debris flow distribution data of the corridor (foreign section) has good reliability of data information, and the data can be used as the basic data for debris flow distribution law, debris flow risk, and risk calculation. The extraction of the debris flow basin mainly adopts the hydrological analysis method in ArcGIS, taking into account the accuracy limitation of DEM, combined with Google Earth images to perform necessary manual correction.
SU Fenghuan
This data is the debris flow risk assessment data, which is obtained from the analysis and research of the debris flow disaster in the China Pakistan Economic Corridor. The sample data of debris flow is the detailed data of debris flow disaster through remote sensing interpretation and on-site verification. A risk assessment system is established to evaluate the debris flow risk in the study area by using the information method, and then the risk area is divided by using the natural breakpoint method. This data can be used to assess the risk of major debris flow disasters, understand the relationship between the risk degree of major debris flow, and provide scientific guidance for the decision-making of local government departments in disaster prevention and mitigation and urban governance.
SU Fenghuan
This data is the debris flow risk assessment data obtained from the analysis and Research on the debris flow disaster in the China Pakistan Economic Corridor, and the data source is the risk and vulnerability analysis results obtained from this study; The research method is based on the risk expression given by the United Nations Department of Humanitarian Affairs (1992): risk = hazard × Vulnerability, risk analysis of debris flow disaster in the study area.. The purpose of this data is to assess the risk of debris flow disaster in the China Pakistan Economic Corridor, understand the relationship between the intensity of major debris flow risk, and provide scientific guidance for the decision-making of local government departments in disaster prevention and mitigation and urban governance.
SU Fenghuan
This data is the debris flow risk assessment data obtained from the analysis and Research on the debris flow disaster in the China Pakistan Economic Corridor, and the data source is the risk and vulnerability analysis results obtained from this study; The research method is based on the risk expression given by the United Nations Department of Humanitarian Affairs (1992): risk = hazard × Vulnerability, risk analysis of debris flow disaster in the study area.. The purpose of this data is to assess the risk of debris flow disaster in the China Pakistan Economic Corridor, understand the relationship between the intensity of major debris flow risk, and provide scientific guidance for the decision-making of local government departments in disaster prevention and mitigation and urban governance.
SU Fenghuan
Focusing on the objective of estimating the total amount of unconsolidated sediments in the Yarlung Tsangpo River Basin (YTRB), we marked a series of Quaternary sections of unconsolidated sediments in the whole basin to measure their thickness. The dataset presents a collection of field photos of unconsolidated sediments obtained in the scientific expedition in YTRB in 2020. Specifically, this dataset comprises of 16 composite first–class sub basins, from upstream to downstream, including Dangque–Laiwu Tsangpo, Resu–Lierong Tsangpo, Chaiqu–Menqu, Xiongqu–Wengbuqu, Jiada Tsangpo, Pengji Tsangpo–Sakya Chongqu, Duoxiong Tsangpo, Shabu–Danapu, Nianchu River, Xiangqu–Wuyuma, Manqu, Nimuma–Lhasa River, Gonggapu–Luoburongqu, Niyang River, Yigong Tsangpo–Palong Tsangpo, and Xiangjiang River Basin. A total of 584 sites of unconsolidated sediments were marked. The atlas displays different types of unconsolidated sediments, such as alluvium, eluvium, diluvium, colluvium, eolian, lacustrine and moraine deposits, showing their spatial distribution in hillsides, foothills, floodplains, terraces, alluvial–diluvial fans and glacier fronts. With a scale of 1m benchmarking, it shows the significant difference in distribution of thickness. Generally, the thickness of the eluvium on the upper part of the hillside is about 0.3–2.5m, and the thickness of the alluvium is difficult to bottom out. The thickness of diluvium in the gentle area of the piedmont with steep slope is usually between 5 and 10 m, while the thickness of the deposit at the piedmont gully mouth is related to the scale of the pluvial fan, which can reach tens of meters thick and only 3 to 4 meters thin. From the upstream to the downstream, the thickness of alluvium varies greatly. The bedrock in the canyon area is exposed, and the thickness is almost 0. However, the thickness of alluvium in the upstream river valley is large and difficult to see the bottom interface; The maximum thickness of measured moraine deposits can reach more than 20 m. Aeolian deposits are common in the middle and upper reaches, with a wide range of thickness, ranging from a few meters to more than 20 meters. The dataset provides a wide variety of in–suit photos and measurements of unconsolidated sediments covering the whole basin, showing their characteristics of spatial distribution and genetic types, which lays a material foundation and prior knowledge for further detailed characterization and investigation of unconsolidated sediments. This work presents data for estimating the total accumulation of solid debris deposited in the YTRB, and provides a basis for assessing the risk of natural disasters related to unconsolidated sediments and formulating scientific preventive measures.
LIN Zhipeng, WANG Chengshan , HAN Zhongpeng, BAI Yalige, WANG Xinhang, HU Taiyu
This dataset includes the schematic diagrams and lithologic histograms of the measured sections of typical unconsolidated sediments in Shigatse, Yarlung Tsangpo River Basin, as well as the statistical table of measured sections. The source data comes from a two-month field measurement in Shigatse, Tibet. 16 sections of unconsolidated sediments were measured, and 128 samples were collected, including 89 cosmic nuclide samples and 39 optically stimulated luminescence samples. 16 schematic diagrams and 38 lithologic histograms were shown. The dataset primarily shows the genetic types of typical unconsolidated sediments in the Shigatse area, such as alluvium, eluvium, diluvium, colluvium, and moraine deposits. The exposed range of measured sediment thickness is about 1.6–70 m, the average thickness is about 29 m, and the horizontal distribution is 41–9059 m. The dataset demonstrates the discrete, porous, sandy and weakly cemented structural characteristics of the unconsolidated sediments with high gravel content (80%–95%), and the main gravel diameter distribution is 0.05–0.1m; sorting and roundness of alluvium are good, while the colluvial materials are poor. Fining-upward trends are commonly seen in most sections, and parallel and tabular cross-bedding are occasionally developed. Untangling the sedimentary characteristics of unconsolidated sediments in the Yarlung Tsangpo River Basin is vital to reveal the storage of fluvial solid matter across the basin, and provide important instructions for disaster warning and prevention and control of related features caused by sliding, unloading, and collapse of the ground surface. It is also of great scientific value to reveal the source-sink process and evolution of fluvial and alluvial systems in the Tibet Plateau and its surrounding basins.
LIN Zhipeng, WANG Chengshan , HAN Zhongpeng, BAI Yalige, WANG Xinhang, ZHANG Jian, MA Xinduo
The considerable amount of solid clastic material in the Yarlung Tsangpo River Basin (YTRB)) is one of the important components in recording the uplift and denudation history of the Tibet Plateau. Different types of unconsolidated sediments directly reflect the differential transport of solid clastic material. Revealing its spatial distribution and total accumulation plays an important value in the uplift and denudation process of the Tibet Plateau. The dataset includes three subsets: the type and spatial distribution of unconsolidated sediments in theYTRB, the thickness spatial distribution, and the quantification of total deposition. Taking remote sensing interpretation and geological mapping as the main technical method, the classification and spatial distribution characteristics of unconsolidated sediments in the whole YTRB (16 composite sub-basins) were comprehensively clarified for the first time. Based on the field measurement of sediment thickness, the total accumulation was preliminarily estimated. A massive amount of sediment is an important material source of landslide, debris flow and flood disasters in the basin. Finding out its spatial distribution and total amount accumulation not only has theoretical significance for revealing the key information recorded in the process of sediment source to sink, such as surface environmental change, regional tectonic movement, climate change and biogeochemical cycle, but also has important application value for plateau ecological environment monitoring and protection, flooding disaster warning and prevention, major basic engineering construction, and soil and water conservation.
LIN Zhipeng, WANG Chengshan , HAN Zhongpeng, BAI Yalige, WANG Xinhang, ZHANG Jian, MA Xinduo, HU Taiyu, ZHANG Chenjin
This data is the material physical property data of the typical debris flow trenches of G217 and G30, the main traffic roads in the Tianshan area. This data is the detailed information of the typical debris flow disaster points in the study area, including watershed parameters, channel parameters, and debris flow accumulation material physical parameters; these data can be Combined with the rainfall data, the research contents such as the rainfall threshold of debris flow activities in this area can be further carried out. Including the area of the debris flow basin, the width of the ditch, the length of the ditch, the vertical gradient, the area of the glacial lake, and the physical properties of the debris flow deposits. The physical property data of the accumulation were obtained by experimental equipment such as a laser particle size analyzer, and the saturated permeability coefficient was obtained by a triaxial experiment.
CHEN Ningshen
The near surface atmospheric forcing and surface state dataset of the Tibetan Plateau was yielded by WRF model, time range: 2000-2010, space range: 25-40 °N, 75-105 °E, time resolution: hourly, space resolution: 10 km, grid number: 150 * 300. There are 33 variables in total, including 11 near surface atmospheric variables: temperature at 2m height on the ground, specific humidity at 2m height on the ground, surface pressure, latitudinal component of 10m wind field on the ground, longitudinal component of 10m wind field on the ground, proportion of solid precipitation, cumulative cumulus convective precipitation, cumulative grid precipitation, downward shortwave radiation flux at the surface, downward length at the surface Wave radiation flux, cumulative potential evaporation. There are 19 surface state variables: soil temperature in each layer, soil moisture in each layer, liquid water content in each layer, heat flux of snow phase change, soil bottom temperature, surface runoff, underground runoff, vegetation proportion, surface heat flux, snow water equivalent, actual snow thickness, snow density, water in the canopy, surface temperature, albedo, background albedo, lower boundary Soil temperature, upward heat flux (sensible heat flux) at the surface and upward water flux (sensible heat flux) at the surface. There are three other variables: longitude, latitude and planetary boundary layer height.
PAN Xiaoduo
Based on the compilation of major mountain torrent disaster cases from 1840 to 2019, this data is the mountain torrent disaster investigation data along the Sichuan Tibet railway, including time, location, disaster type, cause, longitude, latitude, rainfall, railway section and disaster loss information. According to the characteristics of different data sources such as investigation and compilation of historical flood data in China, national mountain flood disaster prevention and control project (2013-2015), mountain flood disaster investigation results and field investigation in Sichuan Province and Tibet Autonomous Region, the authenticity and consistency of the original data are checked and standardized; Then analyze, sort and summarize according to the data source and data; Finally, the use of SuperMap software for processing.
WANG Zhonggen
1) Data content It includes the observation year, latitude and longitude, altitude, ecosystem type and soil layer (soc0-100 (kgcm-2); 0-100 represents soil layer), underground biomass content. 2) Data sources This part of the data is obtained from the literature, specific literature sources refer to the documentation. 3) Data quality description The data cover a wide range, including comprehensive indicators, showing the content of soil organic carbon under different soil layers, with high integrity and accuracy, which can meet the estimation of soil carbon storage of grassland in Qinghai Tibet Plateau. 4) Data application achievements and Prospects It provides basic data for predicting the carbon source sink effect of soil and realizing the sustainable development of ecosystem carbon in the future.
HU Zhongmin
1) Data content It includes the observation year, longitude and latitude, ecosystem type, annual rainfall, drought index, annual net primary productivity, aboveground biomass, underground biomass and other data. 2) Data sources One part is from literature (1980-1995), the other part is from field sampling (2005-2006). 3) Data quality description The data has a long observation year, a large time span, a wide coverage, and many indicators, which has high integrity and accuracy, and can meet the estimation of grassland carbon storage in the Qinghai Tibet Plateau. 4) Data application achievements and Prospects It provides basic data for predicting the carbon source sink effect and realizing the sustainable development of ecosystem carbon in the future.
HU Zhongmin
Contact Support
Northwest Institute of Eco-Environment and Resources, CAS
0931-4967287
poles@itpcas.ac.cn
Links
National Tibetan Plateau Data CenterFollow Us
A Big Earth Data Platform for Three Poles © 2018-2020 No.05000491 | All Rights Reserved
｜ 
No.11010502040845
Tech Support: westdc.cn
